Fits 1966-Up Torqueflite and Torque-Command 727,904,998 & 999.  The Chrysler's unique feature is the rear entry of the cable to the transmission, no starter or header problems.  The cable exits shifter towards engine. Enters transmission from the rear.  All necessary hardware included and easy installation. Special Note:  Park/ Neutral Start Switch fits transmission, not shifter.  Gating designed specifically for the Torqueflite gear selection. 

Part #70001B  CHEETAH SCS SHIFTER with Black Gate Plate, Control Switch and Park/Neutral Start Switch (PRN321 / PRN123). 

#70001B will work in either Stock Pattern (PRN321) or Reverse Pattern (PRN123) applications manually.  These models can use single or dual shift devices in Stock Pattern (PRN321).

If the #70001B is used in Reverse Pattern (PRN123), it will not work with dual shift devices, but will work with single shift devices.  If you wish to control your dual shift device more accurately, choose the CHEETAH E-SHIFT Controller!

Part #70011  CHEETAH SCS SHIFTER with Black Gate Plate, Control Switch and Park/Neutral Start Switch.  Designed for Reverse Pattern Only (PRN123) with dual shift air shifter capabilities.

Fits Torqueflite & Torque-Command 727,904,998 & 999.   Cable exits shifter towards Front of vehicle. Enters transmission from the rear.  All necessary hardware included for the three speed application only and easy installation.  Gating designed specifically for Torqueflite & Torque-Command Reverse Pattern Only (PRN123). 

TWO NEUTRAL DECAL

If you have a valve body with two neutrals you must use our CHEETAH SCS Shifters, #70001B Mopar, #70002B GM and #70003B Ford.  

If you have a CHEETAH SCS Shifter #70011 Mopar, #70012 GM or a #70013 Ford, change gate to a #70075B GM, #70076B Mopar or #70077B (FORD).

 

Part #70002B  CHEETAH SCS SHIFTER with Black Gate Plate, Control Switch and Park/Neutral Start Switch (PRN21 / PRN321/ PRN12 / PRN123). 

Fits Aluminum Powerglide, Turbo Hydro 200, 250, 350 & 400.  A cosmetic insert is included for Powerglide application (it has been installed on # 70002B shifter.  Remove if you are using on a Turbo Hydro.  Cable exits shifter towards rear of vehicle.  Enters transmission from the rear. All necessary hardware included for two speed and three speed applications with easy installation. 

#70002B will work in either Stock Pattern (PRN321) or Reverse Pattern (PRN123) applications manually.  These models can use single or dual shift devices in Stock Pattern (PRN321).

If the # 70002B is used in Reverse Pattern (PRN123), it will not work with dual shift devices, but will work with single shift devices.  If you wish to control your dual shift device more accurately, choose the CHEETAH E-SHIFT Controller!

Part #70012  CHEETAH SCS SHIFTER with Black Gate Plate, Control Switch and Park/Neutral Start Switch.  Designed for 3-Speed Reverse Pattern Only (PRN123) with dual shift air shifter capabilities.

Fits Turbo Hydro 200,250,350 & 400.  Cable exits shifter towards rear of vehicle. Enters transmission from the rear.  All necessary hardware included for the three speed application only and easy installation.  Gating designed specifically for Turbo Hydro Reverse Pattern Only (PRN123). 

FORD STYLE

(Cable hanger rail points to the rear.
Shown with optional Command Center #70250)

  FORD MODELS:

Fits Ford C4 & C6.  Cable exits shifter towards rear of vehicle. Enters transmission from the rear. All necessary hardware including a special shaft, C4 lever and C6 lever for precise and secure installation. 

Part #70003B  CHEETAH SCS SHIFTER with Black Gate Plate, Control Switch and Park/Neutral Start Switch (PRN321 / PRN123). 

#70003B will work in either Stock Pattern (PRN321) or Reverse Pattern (PRN123) applications manually.  These models can use single or dual shift devices in Stock Pattern (PRN321).

If the #70003B is used in Reverse Pattern (PRN123), it will not work with dual shift devices, but will work with single shift devices.  If you wish to control your dual shift device more accurately, choose the CHEETAH E-SHIFT Controller!

Part #70013  CHEETAH SCS SHIFTER with Black Gate Plate, Control Switch and Park/Neutral Start Switch. Designed for Reverse Pattern Only (PRN123) with dual shift air shifter capabilities.

Fits Ford C4 & C6.  Cable exits shifter towards rear of vehicle. Enters transmission from the rear.  All necessary hardware included for the three speed application only and easy installation.  Gating designed specifically for Ford C4 &C6.